Trophy – This trophy is specially design for Runners. It is printed in PLA/ABS and can be painted with different colors. We recommend printing at 100 microns (0.1 mm) layer thickness. Model is optimized for printing with as few supports as necessary, and have been oriented for optimal printing..
This is my Trophy design for the Running competition. I went with Modern aesthetic design trophy shape. This design is simple and elegant, I believe it would display well along side other awards.
- Single Unit Model (Size adjustable)
- Single Color
- Finish – any Paint if printed in ABS material
- One click Print – No Extra Modification
- Medium Quality 100 Microns
- Post Production time – 10 min
- Overall 3 Hrs. to get desired result for 100 Microns resolution.
- Software – Repetier Host
- Material Used – PLA/ABS
- Supports – Minimum
- Layer height 0.1
- Ready to Print – Yes
- Nozzle temp 210
- Heat bed temp 55
- Infill 70%
- Shells 6
- Raft & Brim yes
- Total Print time -2 Hrs. 50 min
- Weight 220 g
- Dim: 106mmx45mmx230mm