Hexagon Lamp – A Night Lamp good for interior decoration. Main highlight of this lamp is that it can be illuminated with difference color light. A great design to add this to our house for lighting purpose.
- Single Unit Model with Top cap for holding Light Bulb included (Size adjustable)
- Single Color only
- Finish – any Paint if ABS material used for printing- ( Not Required if PLA used)
- One click Print – No Extra Modification
- Medium Quality 100 Microns (Good Quality 50 microns Print time 18 Hrs)
- Post Production time – 1 Hrs.
- Overall 13 Hrs. to get desired result for 100 Microns resolution.
- Size Diameter for perfect Printing (120mm, 150 mm & 220mm) Print Time Varies.
Note : – Light bulb of maximum 15 watts shall be used.
- Software – Repetier Host
- Material Used – PLA/ABS
- Supports – No Supports required
- Layer height 0.1
- Ready to Print – Yes
- Nozzle temp 210
- Heat bed temp 55
- Infill 80%
- Shells 6
- Raft & Brim yes
- Total Print time – 12 Hrs. for ( 220 mm Size)
- Weight 220 g
- Dim: 220mmx210mm